EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (2 Hz – 1 kHz), low frequency mode (0.01 Hz – 1 kHz) for evoked potentials and low frequency applications and DC mode (0 Hz – 1 kHz) for slow cortical potentials. Modes can be changed on-the-fly. Also includes DIN input connectors for use with standard EEG electrodes.

Learn more >

EEG-Z is a pre-amplified electroencephalograph sensor with built in impedance checking. Get the ultimate hook up every time with this sensor as it monitors skin impedance (both the reactive and resistive elements) and sensor connection.

EMG MyoScan is a pre-amplified surface electromyography sensor used with the ProComp Infiniti/ProComp5 Infiniti channels A – B or all FlexComp-Infiniti channels for RAW sEMG. Compatible with Triode electrodes or extender cables for wider placement of electrodes. Range of 0 – 2000 µV.

EMG MyoScan Pro is a pre-amplified surface electromyography sensor used with the ProComp Infiniti channels C – H for RMS sEMG. Features a range switch in the sensor head to change filter settings between 0 – 400 µV Narrow filter, 0 – 400 µV Wide filter, 0 – 1600 µV Wide filter with 0.1 µV sensitivity. Compatible with Triode electrodes or extender cables for wider placement of electrodes.

EKG sensor is a pre-amplified electrocardiograph sensor, for directly measuring heart electrical activity. Connects via extender cables for a single channel hook up.

Skin Conductance sensor measures the conductance across the skin, and is normally connected to the fingers or toes. Supplied with two finger bands.

Respiration Sensor includes a sensitive and repeatable girth sensor using an easy fitting high durability latex rubber band fixed with self-adhering belt for monitoring respiration rate, waveform and amplitude. Can be worn either thoracically or abdominally, over clothing.

Temperature sensor measures skin surface temperature between 10°C – 45°C (50°F - 115°F ). It is supplied with a self adhering band for easy finger placement.

This adapter connects to Biometrics' torsiometers or single and dual axis goniometers, for monitoring joint movement in multiple planes. Ideal choice for Ergonomics and Gait Analysis.

(Goniometer & Torsiometer to be purchased from Biometrics separately).

This adapter connects to third party Force sensors of varying sensitivity to measure pressure or force, such as Tekscan Flexiforce and Imaging Technologies Uniforce. It can be used to monitor tactile activity, or as a foot switch for Gait Analysis.

Bend sensor is small enough to be placed on fingers and wrists to monitor joint motion 180 degrees of flexion. Use sensors back to back to get a 360 degree range.

InclinoTrac is a single inclinometer that measures the inclination angle relative to the ground. InclinoTrac uses solid-state micro-machined sensors and microprocessor technology to provide rapid settling and high resolution (0.1°) and accuracy (1.0°).

Learn more >

Dual-InclinoTrac is a dual inclinometer that measures relative angle (between back and head, for instance). Ideal choice for Range Of Motion assessment.

Learn more >

ForceTrac is a highly sensitive and accurate sensor capable of monitoring any force perpendicular to its surface through one of 3 attachments.

It can be used as an algometer with its rod attachment or as a manual muscle tester with a choice of flat or curved rubber-coated attachment.

Learn more >